C
ClearInsight News

How do you use Kool elite deck?

Author

John Castro

Published Mar 17, 2026

How do you use Kool elite deck?

Begin applying. Dip the brush into the mix covering the full length of the bristles and start splashing the mixture. If necessary, additional water should be added to the Kool Deck Elite mixture so the material will rain from the brush and have a creamy appearance when splashed.

Keeping this in view, can Kool deck be applied to existing concrete?

Kool Deck can be applied to BOTH new and existing concrete!

It's relatively easy to get a great bond with Kool Deck to the concrete when done properly. Mortex provides significant resources for helping contractors on how to properly prepare a surface for using PTA Bonding Agent.

Subsequently, question is, what makes Kool deck cool? Mark said the ingredients in Kool Deck are secret, but its base is a mix of marble sand and white cement. The lighter the color, the cooler the surface. The pattern is key; the dips and mesas mean you don't touch the entire surface at once. It can be 20 degrees cooler than other decking.

Also know, when can you walk on Kool deck?

Kool Deck® and Solementâ„¢ concrete overlays need sufficient time to cure. The normal curing process of concrete with Kool Deck or Solement takes 28 days. The owner should limit contact with the deck for 48 hours, and should restrict even light use of the deck for one week. Walking traffic can begin after two weeks.

Can you paint over cool deck?

Concrete cool deck surfaces can be painted. When cool deck is applied, it reduces surface temperatures and withstands environmental heating and cooling better than concrete alone. Cool deck lasts for years, but in time cool deck can become weathered.

How long does it take cool deck to dry?

If you choose to go the acid route, be sure to neutralize, TSP, and pressure wash thoroughly to clean. As a final step, make sure that any rust that may be on the surface is neutralized with an aerosol-based rust inhibitor. It's best to allow at least 48 hours for your concrete to dry before applying Coolâ„¢.

How do I keep my deck cool?

4 Ways to Cool Down Your Decking
  1. Protect Your Feet from the Hot Decking with Rugs.
  2. Cool Wood decking by Painting a lighter Cool.
  3. Cooling the Deck with Air Movement.
  4. Using Fans to Cool Down Your Deck.
  5. Cooling Your Deck with Misters.
  6. Decorating a Deck to be Cooler.
  7. Using Plants and Trees to Cool Your Deck.

How do I make my pool deck cooler?

One of the coolest options for pool deck surfaces are textured acrylic coatings. A coating that's made of concrete and acrylic will absorb less heat than other materials. Texture also makes the surface feel cooler to the touch because when a person walks on it, their bare feet are exposed to less surface area.

How much does cool deck cost?

pre-mixed bag. Standard Kool Deck, known as Keystone Kool Deck, comes at a slightly lower cost. Professional contractors at Backyard by Design estimate that Kool Deck costs roughly $3 to $4 per square foot when installed over existing concrete.

Can you resurface Kool deck?

Keeps Your Deck Cool. Clean and etch your concrete in one simple step with our concrete cleaner. Coat existing pool deck surfaces as well as bare concrete with our cool concrete resurfacing paint. Seal and protect your pool deck from the sun, completing your cool deck resurfacing project.

What kind of paint do you use on a Kool deck?

Creating a Cool Pool Deck Surface is Easier Than You Think.

Simply mix one gallon of acrylic paint** (your color choice) to the kit and apply Cool™ with an ordinary 3/8″, 1/2″ or 3/4″ nap paint roller to a clean, prepared surface. Cool dries within 30 minutes. Apply a second coat. Then a clear sealer.

What is Coolcrete?

Keystone Kool Deck was invented by Tucson company, Mortex, in 1962 for use as a surface coating over concrete swimming pool decks, walkways, and patios. Applied to freshly poured concrete, Kool Deck creates a colored, textured concrete surface that the manufacturer says is as strong as the base concrete.

How do I get rust off my cool deck?

Try to remove any rust spots on the deck with a diluted solution of muriatic acid and water. Use no more than five parts water to one part muriatic acid, because stronger concentrations of the acid will kill all vegetation. Rinse the surface first; then apply the diluted solution.

Is cool deck acrylic?

Upgraded Surface – What we know as acrylic lace today used to be known as “kool deck†or “cool deckâ€.

How can I make my concrete patio cooler?

4 Tips for Keeping Concrete Patios Cool
  1. Install a Gazebo or Umbrella. One of the easiest ways to keep a concrete patio nice and cool is to install something that offers shade from the sun.
  2. Paint the Patio. Bare concrete tends to get hotter than painted concrete surfaces.
  3. Lay Down a Rug.
  4. Use Water.

How do I keep my concrete pool cool?

For about $1/square foot, you can have the only pool deck paint coating on the market that keeps concrete cool on hot summer days. Cool can even be applied over existing Kool-Deck and cement-based pool deck coatings to give them a fresh appearance that either maintains or develops a cooling feature.

Is spray deck slippery?

Spray Deck is a safer option to walk on as it is less slippery and also is less likely to get damaged or stained. Though both options provide valid methods options for deck resurfacing, the ultimate decision is up to you.

Continue Reading

Can you tell how old a bird is?

Can a first aider give medication?

What is the difference between ultra rare and ultimate rare?

How do you use Kool elite deck?