IMPORTANT
- Insert the wrench into the hole at the bottom of the garbage disposal.
- Work the wrench back and forth in both directions.
- Continue working with the wrench.
- Check the overload protector.
- Check inside garbage disposal's grinding chamber.
- Turn on the water, then the garbage disposal.
Correspondingly, why is my InSinkErator not working?
Make sure that the disposal switch is in the "OFF" position. Gently press the red button in to reset garbage disposal. If it does not stay in (retracted), wait ten minutes and try again. Turn on a cold stream of water and turn the disposal switch to “ON” position, the disposal should now run again.
Secondly, what to do if Insinkerator stopped working?
- Make sure that the food waste disposer is switched 'OFF' at the socket.
- Gently press the red button in to reset the disposer. If it does not stay in (retracted), wait ten minutes and try again.
- Turn on a cold stream of water and turn the disposer switch to “ON” position, the disposer should now run again.
Also know, is there a reset button on an InSinkErator?
Your InSinkErator garbage disposal is equipped with a device called an overload protector or reset button. This device will turn the garbage disposal off automatically if there is something wrong.
How do you unblock a disposal?
How To Unclog A Kitchen Sink With A Garbage Disposal
- Start by unplugging the garbage disposal.
- Use a natural cleaner made from ¼ cup baking soda followed by ½ cup vinegar.
- Allow water to run for a few minutes to clear the clog.
- Repeat as necessary.
- If the clog remains after using this procedure a few times, use a flashlight to peer into the drain.
