C
ClearInsight News

How do I factory reset my DJI Phantom 4?

Author

Sophia Sparks

Published Mar 10, 2026

How do I factory reset my DJI Phantom 4?

Open the DJI Assistant 2 application on your computer, then plug your drone to your computer using the USB cable. Then click on the PHANTOM 4 icon to select it. Next, go to the Firmware Update and click on the Factory Reset button in order to restore the device to Factory Settings.

People also ask, how do I reset my DJI Phantom 4 Pro?

Using DJI Assistant 2 (get the latest version) and it will allow a refresh or a reset to Factory Defaults. If that is not possible with the Remote Controller, you can try to touch the Icon in the upper right corner of the white Splash screen for over 5 seconds. It will open a reset and roll-back options.

Also Know, how do I reset my drone to factory settings? Press and hold the drone's power button for 9 secs.

  1. Open the DJI Assistant program.
  2. Make sure to have Firmware Update (1) selected, and then click on RESTORE FACTORY DEFAULTS (2).
  3. There will be a confirmation screen, click on CONFIRM.
  4. When it is done, click on COMPLETE.

Subsequently, one may also ask, how do I reset the Phantom 4 plane?

Double tap the power button on the battery.

How do I reset my DJI Phantom 4 controller?

How do you do a hard reset on a normal p4p remote. You can hold the three bars on the right side of DJI GO 4 for 10 seconds to refresh the firmware. Alternatively, you can turn on the RC, hold C1, C2, and the record button, then turn off and turn on the RC again to check.

How do I update my phantom 4 controller?

Update the Firmware on the Phantom 4 Remote Controller

Plug the remote controller into your mobile device using a USB cable. Launch the DJI GO app as normal. Click the status bar at the top of the app and click the 'Overall Status' option, which should prompt you with 'Firmware Upgrade Required'.

How do I pair my phantom 4 remote?

Linking the Controller to Your Aircraft
  1. Turn on the remote controller, connect it to your mobile device and launch the DJI GO app.
  2. Power up the Phantom 4 Battery.
  3. Select 'Camera', press the remote controller icon, then tap the 'Linking RC' button.

How do I reset my DJI spark controller?

Hold down the power button on the Spark for 9 seconds until you hear three beeps. Then do the same on the controller. Power off both the Spark and the controller. Power on the controller and then hold down the pause, Fn and bottom right shoulder button (underneath the camera button) until you hear continuous beeping.

How do I control the camera on my DJI Phantom 4?

Press the shutter button on the left shoulder of the remote control to take a shot.
  1. Launch the DJI GO 4 app on your mobile device.
  2. Make sure the camera is set to photo shooting mode.
  3. Tap the shutter button to take a shot.

How do I turn off my DJI Phantom 4 controller?

The power on/off is the same for the RC as the flight battery. Press once then let go, then press again for a few seconds.

How far can the Phantom 4 Pro fly?

4.2 miles

What is the latest firmware for DJI Phantom 4?

At the time of writing, the latest Phantom 4 firmware version is;
  • Phantom 4 Standard quadcopter firmware version number is v02. 00.0700.
  • Phantom 4 Pro quadcopter firmware version is V 01.05. 0600.

How do I connect my phantom 4 to DJI go 4?

Select Wi-Fi.
  1. Launch the Play Store app on your Android device.
  2. Tap in the search box at the top of the screen.
  3. Search for "DJI GO 4" and tap on the found app.
  4. Tap Install and then Open to use it.

How do I factory reset my Mavic mini?

There is no factory reset for Mavic Mini, you can refresh the firmware to initialize the settings.

How can I sell my drone?

How to sell your old drone
  1. 1) Remove your FAA registration. If you have only a very small drone, like the DJI Mavic Mini, you can skip this step.
  2. 2) Format your SD card.
  3. 3) Record cumulative flight data.
  4. 4) Gather up your accessories and packaging.
  5. 5) Clean up your drone and accessories.
  6. 6) Take photos.
  7. 7) Pick a marketplace.

How do I reset my Mavic WiFi password?

If you want, you can change the SSID name and password via the WiFi tab in the DJI Go app settings. If you want to reset it, press and hold the linking button for 5 seconds.

How do I unregister my DJI Drone?

There is no way to de-register drones with DJI. When the next owner flies your drone, they will need to log into DJI GO (just like you did). Since the new owner will be logged in, any data sent back to DJI will be associated to their DJI account.

Continue Reading

What does ICAO Annex 17?

How many kilograms is a yard of fabric?

Ist Wein ein Lebensmittel?

How do I factory reset my DJI Phantom 4?