How do I connect to the Aruba console port?

1. Under Category, choose Session.
2. Under Connection type, choose Serial.
3. In the Serial line, enter the COM port on your laptop that is connected to the console port on your router, using the console cable.
4. Click Open.

1. Step 1: Connect your serial connection.
2. Step 2: Conenct PuTTY.
3. Step 3: Get the IP address.
4. Step 4: Set time server.
5. Step 5: Set SNMP community info.
6. Step 6: Launch the web GUI.
7. Step 7: Configure basic info.
8. Step 8: Create VLANs.

1. Connect a local console to the serial port on the managed device.
2. From the console, login into the managed device as a password recovery user.
3. Enter configuration mode by typing in configure terminal.
4. To reset the administrator user account password, use the mgmt-user admin root command.

1. Open the Windows Device Manager.
2. Click on the Ports (COM & LPT) to expand the selection.
3. Right-click on the device whose designation you want to change and select Properties.
4. Click on Port Settings and then click the Advanced button.

1. Login to Cisco's support site and download the Cisco USB Console driver.
2. Plug in USB cable to Cisco device and PC.
3. From your PC open Device Manage à Ports should now show the Cisco Serial (COM3) listed.
4. Open Putty, choose Serial and change COM1 to COM3 and click Open.

1. Go to Windows Device manager > Multi-port serial adapters.
2. Select the adapter and right click to open the menu.
3. Click on the Properties link.
4. Open the Ports Configuration tab.
5. Click on the Port Setting button.
6. Select the Port Number and click OK.
7. Click OK to apply the changes.

1. Open Device Manager.
2. Click on View in the menu bar and select Show hidden devices.
3. Locate Ports (COM & LPT) in the list.
4. Check for the com ports by expanding the same.

1. Serial to USB Adapter:
2. Connect the Console and Serial adapter together (Female end to the Serial Male end).
3. 2: Connect the USB cable into your computer/laptop and launch “Device Manager” Verify which COM Port the cable has picked up and make a note of the port number.

1. Connect the console port to a laptop or PC using the RJ-45 to DB-9 serial port adapter.
2. At the shell prompt type ezsetup.
3. Enter the hostname.
4. Enter the root password.
5. Enter yes to enable services like Telnet and SSH.
6. Next, select one of the switch management options:

Using the 192.168.1.1 IP address

1. Click Start, and then click Control Panel.
2. Click Local Area Connection, and then click Properties.

1. Connect one end of the yellow Ethernet cable to an Ethernet switch port on the router. (See Figure 3-2.)
2. Connect the other end of the cable to the available port on the Ethernet switch to add additional Ethernet connections.
3. Turn on the Ethernet switch.